CareGiver 360 Barrier-Free Shower Floor with 360.100 Entry Ramp
For those with mobility challenges, the curbless Model 360 Barrier-Free Shower Floor and Optional 360.100 Entry-Ramp enables effortless wheelchair access. Its’ 8-1/2″ x 15″ drain offset and Left hand or Right hand drain placement (matching that of a standard bathtub), provides for convenient installation or retrofit in a standard 30″ x 60″ bathtub alcove. Possessing a clean, contemporary design, the Model 360 Barrier-Free shower floor and 360.100 entry ramp (order seperately) from E.L. Mustee & Sons, Inc. creates a multitude of floor plan design options.
The CareGiver 360 Barrier-Free Shower Floor with 360.100 Entry Ramp features:
- – Produced from high-grade, reinforced, molded fiberglass for optimum strength and impact resistance using matched metal molds under heat and pressure.
- – Ideal for new or remodel projects…fits DURAWALL® Shower Walls (see Accessories section) as well as ceramic tile or preformed wall kit.
- – Fits 60” wide by 30” deep alcove
- – Drain hole is offset 8-1/2” x 15” for connection to 2” DWV piping
- – Slip resistant surface
- – Optional drain kit is available for connecting to existing 1-1/2” bathtub DWV line.
- – Available in both LH and RH drain locations
- – Available in white or bone
- – Smooth, colorfast semi-gloss finish, resists scuffs.
- – Mold and mildew-resistant…easy to clean
Colors:
Model # |
Description |
Drain Location |
Fits Alcove |
Availability |
| Barrier-Free Shower Floor | ||||
|
|
||||
| 360R | White | RH | 30″ x 60″ | In Stock |
| 360RBN | Bone | RH | 30″ x 60″ | Special Order |
| 360L | White | LH | 30″ x 60″ | In Stock |
| 360LBN | Bone | LH | 30″ x 60″ | Special Order |
| Entry Ramp (Order separately) 12″ deep x 60″ wide | ||||
|
|
||||
| 360.100 | White | — | — | In Stock |
| 360.100BN | Bone | — | — | Special Order |
RH=Right Hand LH= Left Hand
Enquiry about CareGiver 360 Barrier-Free Shower Floor with 360.100 Entry Ramp
Enter your name :
Enter your Email Id :
Description
-
Code Accepted
Mustee Easy Access Showers meet or exceed performance requirements as listed:
Americans with Disabilities Act (ADA)- American Society of Testing & Materials (ASTM)-D635 Flammability, E84 Flame Spread, E165.75 Fire Retardancy
General 360:
Furnish and install as shown on plans, barrier-free DURABASE® Shower Floor Model 360 and Entry Ramp model _______ (360.100, 360.100BN) as manufactured by E.L. Mustee & Sons, Inc. Shower floor to be one-piece, molded fiberglass, using matched metal molds under extreme heat and pressure. Surface to be slip-resistant design that does not interfere with flow of
water. Size: 30″ x 60″. Shoulder will be not less than 3-1/16″ high or less than 1-1/4″ wide. Tiling flange will extend not less than 1″ higher than shoulder. Shower floors shall not have curb used in conjunction with 12″ x 60″ entry ramp per ADA requirements. Drain available on right or left side, offset 8-1/2″ x 15″. Shall meet ANSI Specification Z 124-2011 1990. Color _____ (White, Bone). Install in compliance with local codes.
General 360.100:
Furnish and install as shown on plans Shower Floor Entry Ramp model: _______ , as manufactured by E.L. Mustee & Sons, Inc. Ramp to be one piece, molded fiberglass made with matched metal molds. Slip resistant surface. Trimmable to accommodate for a nearby toilet or other structure. Size 12″ x 60″. Color: ______ (White, Bone)
Accessories
The accessory products presented below will enable you to customize your Model 3060 ShowerTub™ installation to meet the specific needs of your application.
 |
Continuous Water Barrier KitThe 360.210 Continuous Water Barrier Kit creates an effective water barrier for the shower threshold that easily collapses for wheelchairs or walkers then instantly reforms to keep water from escaping.
|
||||||||
 |
|
||||||||||||||||||
 |
|
|||||||||||||||||||||
|
|
|||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||
 GapSeal-Pro™ — For all shower floors and bathtubs
The flexible PVC GapSeal-Pro™ features a strong adhesive strip that allows it to be easily positioned to “extend” the tile flange and effectively seal the gap between drywall or like-surfaces on shower floors or bathtubs. Patent pending. |
||
| Model No. | Description | Availabilty |
|
|
||
| 60.320A | 132″ long x 2″ tall | Regular Stocked Item |
Reviews
There are no reviews yet.